Standing Seam Metal Roof

Standing Seam Metal Roof  Standing Seam Metal Roof P2200020 There’s metal roofing, and then there’s a particular type called standing seam metal roofing. Houses in your neighborhood with metal roofs most likely are of the standing seam variety. Continuous panels run from the ridge of the roof all the way down to the eaves. Between the panels are seams connected by fasteners which are raised above the level of the metal roofing. This is where we get the term standing seam, because the seam is raised or standing, as opposed to flush-mounted.

  • 40 Year Paint Warranty
  • 1” Double Lock Panel
  • 200 MPH wind Rating
  • Class 4 Impact Rating
  • Class A Fire Rating
  • 26 Gauge Galvalume (not Galvanized)
  • Energy Star Matte Paint finishes Available
  • Synthetic Water Proof Metal Roof underlayment
  • No Leak W Valley
  • Hand Made Flashing (Not premanufactured)
  • Screws (not Nails)
  • Tapered Valleys, Drip Edge, and Ridge Caps
  • Metal Roofing Panels Make onsite
  • Custom Cut Riglets and Sidewall Flashing
  • Vented Ridge
  • Custom Vented J Channel
  • Eave Cold Air Intake
  • Vents the attic
  • Reduces attic Temperatures
  • Reduces Mold or Mildew
  • Patented Under Roof Ventilation
  • 25% Reduction in Energy Saving *
  • Stops 3 Ways Heat is Transferred
  • Radiant Barrier 97% reflectivity
  • Thermal Break
  • Natural Convective Venting
  • 60 Degree Attic Temp Reduction *
  • Eliminates or Reduces Mold and Mildew