Making Metal Roof Ridge Vent Falls Church VA
Phone 540-222-1642 we are Alpha Rain The Metal Roofing Company. Today it is raining so we are making our Vented J Channel that we use for our custom vented ridge cap for our metal roofing. We are making this on site here in our shop. The Machine we are using has been custom made for us to cut and perforate our metal to the specs we need for our under roof ventilation system. This process is very important in that most metal roofing ridge cape do not have the vented J channel which means the ridge will not vent.
We have just completed a Standing Seam Metal Roof in Falls Church that has our custom ridge vent that actually vents the air from the attic. In the video you will see us making the metal with little vents in it, we then use are break to bend the metal into what looks like a J, and this is called J channel. For the Falls Church job we used the vented J Channel from this run that we made in this video.
Below we have our information and contact info, and also below that I have a link to the Metal Roofing Alliance where you can find contractors, more than just us Alpha Rain. We believe that competition will not be able to provide you products like are under metal roof self-ventilation system, optimized custom solar powered fans designed for you attic and roofing system, but we leave it up to you the customer to decide you self.
Please take a look at our video titled Making Metal Roof Ridge Vent Falls Church VA
[mom_video type=”youtube” id=”OvRRvnzYm2w” width=”400″ height=”300″]
For more info please fill out our form below and I will contact you.
The article was made for the zip codes of 22046, 22044.
Thanks for reading Making Metal Roof Ridge Vent Falls Church VA